60+5 uF MFD ±5% 370/440 VAC Dual Run Start Round Capacitor - Fits Condenser Straight Cool, Heat Pump

60+5 uF MFD ±5% 370/440 VAC Dual Run Start Round Capacitor - Fits Condenser Straight Cool, Heat Pump60+5 MFD uF 5% 370 440 Volt VAC Dual Run Start Round Capacitor Key Features Capacitance Rating: 60 5 Microfarad (MFD) Capacitance Tolerance: 5% Voltage Rating: 370 440 Volts AC (VAC) Terminal Configuration: C (Common), HERM (Compressor), FAN Construction: Round aluminum case with steel cover Operating Temperature Range: 40C to +70C ( 40F to +158F) Safety Standard: Meets EIA 456 A industry standards Operational Life: Rated for 60,000 hours of service

60+5 MFD uF ±5% 370/440 Volt VAC Dual Run Start Round Capacitor

Key Features

• Capacitance Rating: 60/5 Microfarad (MFD)
• Capacitance Tolerance: ±5%
• Voltage Rating: 370/440 Volts AC (VAC)
• Terminal Configuration: C (Common), HERM (Compressor), FAN
• Construction: Round aluminum case with steel cover
• Operating Temperature Range: -40°C to +70°C (-40°F to +158°F)
• Safety Standard: Meets EIA-456-A industry standards
• Operational Life: Rated for 60,000 hours of service

Replaces / Cross-Reference Part Numbers

• Carrier: P291-6054R, 318833-401, HC98JA061
• Goodman/Amana: CAP0600005440, C65-60/5R
• Rheem/Ruud: 43-25134-11
• Trane/American Standard: CPT00667
• Mars: 12266
• Packard: PRCFD605
• Grainger/Dayton: 2MDV8

Compatibility & Fitment

• Application: Designed for HVAC systems, including air conditioners and heat pumps, to power the compressor and fan motor.
• Voltage Compatibility: Replaces both 370 VAC and 440 VAC capacitors with a 60/5 MFD rating. A 440V capacitor can safely replace a 370V unit.
• Physical Dimensions: Verify case dimensions for proper fit. Common dimensions for this rating are approximately 2.5 inches in diameter.

When to Replace

• The outdoor unit's fan or compressor fails to start or struggles to run.
• A humming noise is heard from the unit without the fan or compressor engaging.
• The capacitor casing is visibly swollen, cracked, or leaking an oily substance.
• Capacitance measures outside the specified ±5% tolerance when tested with a multimeter.

Installation Tips

• Warning: Installation should be performed by a qualified technician. High voltage is present.
• Disconnect all electrical power to the unit at the breaker and service panel before beginning work.
• Safely discharge the existing capacitor by shorting the terminals with an insulated screwdriver or a high-wattage resistor.
• Document or photograph the wire connections to the C, HERM, and FAN terminals before removal.
• Secure the new capacitor in the mounting bracket and connect the wires to the corresponding terminals.