Awave DSP-A6 +DRC bundle

Awave DSP-A6 +DRC bundleA very compact 4 channel amplifier with a 6 channel DSP. 4 channels of RCA inputs, 4 high level inputs, integrated Bluetooth input, optional digital remote control for volume, sub level, preset selection, input selection, mute trigger. 4x30W RMS @ 4 Ohm output channels, 6 channel RCA output. Perfect for entry level SQ systems with 2 way front + active sub. Simple and affordable entry in the SQ world without compromises in the DSP functionality. The

A very compact 4-channel amplifier with a 6-channel DSP. 4 channels of RCA inputs, 4 high-level inputs, integrated Bluetooth input, optional digital remote control for volume, sub level, preset selection, input selection, mute trigger. 4x30W RMS @ 4 Ohm output channels, 6-channel RCA output. Perfect for entry level SQ systems with 2-way front + active sub. Simple and affordable entry in the SQ world without compromises in the DSP functionality. The small size allows for it to be installed in a standard 1-Din space in the dashboard.

The DSP supports the following on every output channel:

• High pass, low pass and band pass crossovers (Linkwitz Riley, Bessel and Butterworth) up to 48 dB/oct
• 31 band fully parametric EQ with +/-15 dB correction
• 1st and 2nd order Allpass filters with Q control and inversion (each of the 31 EQ bands can be switched to Allpass)
• Time delay up to 15 ms for time alignment, selectable in ms, cm or inches, optional linking of channel pairs
  
• Phase phase switching between 0 and 180 degrees
  
• Level correction from 0 to -40 dB, optional linking of channel pairs
  
• Fully functional input mixer with precise level control of all input channels
  
• Internal pink noise generator to test each individual output channel

Configuration software for Microsoft Windows: DOWNLOAD HERE

Manufacturer provided specs:

• Power supply voltage: 9-16 VDC
• Standby power: <0.1W
• Bandwidth @ -3 dB: 20Hz-20kHz
• Output power at 1% THD-N: 4x 30W RMS @ 4 Ohm
• Output power at 10% THD-N: 4x 35W RMS @ 4 Ohm
• S/N Ratio full power A-: 100dB
• Inputs: 4xRCA analogue, 4x high-level, integrated Bluetooth
• Outputs: 4x Speaker level amplified, 6x RCA pre-outs for all channels
• Input impedance: High level 10 Ohm, RCA 47 kOhm
• Output impedance: 51 Ohm
• System Sample Rate: 48 kHz 24 bit
• Input Voltage: High level 32 Vpp, RCA 6 Vpp
• Output Voltage: High level 28 Vpp, RCA 8 Vpp
• Startup time: 5s
• Control connections: 1x USB 1.1/2.0, optional wired remote (DRC)
• 8 full setup presets
• Auto on via high level signal detect or remote input
• Size: 174x121x42 mm
• Net weight: 0.8 kg

What's included:

• 1x DSP Amplifier unit
  
• 5m USB A-B cable
  
• 1x High-level input and speaker output harnesses
• 1x Bluetooth antenna
• 1x DRC unit
• 1x DRC remote cable
• Mounting brackets and fasteners
• 1x Instructions