SKU: 73532797182

Milwaukee M18 FPD2-401X Akku Schlagbohrschrauber 18 V 135 Nm Brushless + 1x Akku 4,0 Ah + HD-Box - ohne Ladegerät

$94.20 $104.67
Save 10%
No.2 Bestseller on northstargunworks.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Milwaukee M18 FPD2-401X Akku Schlagbohrschrauber 18 V 135 Nm Brushless + 1x Akku 4,0 Ah + HD-Box - ohne LadegerätLieferumfang: 1x Milwaukee M18 FPD2 0X Akku Schlagbohrschrauber ( 4933464263 ) 1x Zusatzhandgriff 1x Milwaukee M18 B4 Akku 4,0 Ah ( 4932430063 ) 1x Milwaukee HD Box 1x passende Einlage ohne Ladegert Produktbeschreibung: Die M18 FUEL Technik wurde fr die anspruchsvollsten Anwender entwickelt. Sie vereint drei zentrale Bausteine: POWERSTATE, REDLINK PLUS und REDLITHIUM ION. Durch die optimale Abstimmung dieser drei Technologien wird die maximale

Lieferumfang:

- 1x Milwaukee M18 FPD2-0X Akku Schlagbohrschrauber ( 4933464263 )
- 1x Zusatzhandgriff
- 1x Milwaukee M18 B4 Akku 4,0 Ah ( 4932430063 )
- 1x Milwaukee HD-Box
- 1x passende Einlage
- ohne Ladegerät

Produktbeschreibung:

Die M18 FUEL™ Technik wurde für die anspruchsvollsten Anwender entwickelt. Sie vereint drei zentrale Bausteine: POWERSTATE™, REDLINK PLUS™ und REDLITHIUM-ION™. Durch die optimale Abstimmung dieser drei Technologien wird die maximale Leistungsfähigkeit bei größtmöglicher Langlebigkeit erreicht. Der bürstenlose POWERSTATE™-Motor des Schlagbohrschraubers ist für härteste Anwendungen geeignet. Sein bürstenloser Motor (brushless) arbeitet ohne Kohlebürsten und daher absolut verschleißfrei. Dies erhöht den Wirkungsgrad deutlich und der Akku muss weniger oft geladen werden. Die REDLINK PLUS™-Elektronik bietet einen digitalen Überlastschutz für Maschine und Akku und hält die Leistung unter Last konstant. Bei Überlastung des Akkus durch sehr hohen Stromverbrauch brummt das Werkzeug 2 Sekunden lang und schaltet sich selbständig ab. Die fortschrittliche Elektronik sorgt durch die Einzelzellenüberwachung sowie Systemkommunikation zwischen Gerät und Akku für eine lange Laufzeit und Lebensdauer des Akkus. Der REDLITHIUM-ION™ Akku ist extrem widerstandsfähig, er kann problemlos bei Umgebungstemperaturen zwischen -18°C bis +50°C eingesetzt werden. Das integrierte LED-Licht ist 40% heller als beim Vorgängermodell. Die Maschine ist 100% systemkompatibel mit dem Milwaukee® M18™ Produktprogramm. Die HeavyDuty Box inkl. 2 Schnellverschlüssen und Schaumstoffeinlage sorgt für einen sicheren Transport des Werkzeugs. 

Technische Daten:

Hersteller: Milwaukee
Herstellerbezeichnung: FPD2
Spannung: 18 V
Max. Drehmoment: 135 Nm
Bohrfutter-Spannbereich: 1,5-13 mm
Geschwindigkeitseinstellungen: 2
Leerlaufdrehzahl im 1. Gang: 0-550 U/Min.
Leerlaufdrehzahl im 2. Gang: 0-2000 U/Min.
Max. Schlagzahl (1. Gang): 0-8800 U/Min.
Max. Schlagzahl (2. Gang): 0-32.000 U/Min.
max. Bohrdurchmesser in Mauerwerk: 16 mm
max. Bohrdurchmesser in Stahl: 16 mm
max. Bohrdurchmesser in Holz (Flachfräsbohrer): 32 mm
max. Bohrdurchmesser in Holz (Schlangenbohrer): 32 mm
max. Bohrdurchmesser in Holz (Forstnerbohrer): 65 mm
max. Bohrdurchmesser in Holz (Lochkreissäge): 89 mm
Schalldruckpegel: 97,75 dB(A)
Schalleistungspegel: 102,75 db(A)
Maße des Koffers: 480 x 130 x 370 mm


Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 73532797182

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 211 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Joseph E. Brackman
Lexington, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Pawtucket, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Pawtucket, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
G
Verified Purchase
Gigi
West Palm Beach, US
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
M
Verified Purchase
Michelle bullard
Lexington, US
★★★★★ 5
Stable and easy to assemble
I used these to support a heavy piece of countertop would to create a side table. Looks great and holds steady.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2023

recommand products

Mediterraner Zauber auf Ibiza (CALVENDO Wandkalender 2027)
59.99
Rottweiler. Kraft, Herz und Treue (CALVENDO Wandkalender 2027)
59.99
Oma und Opa - Sprüche über das Alter (CALVENDO Wandkalender 2027)
59.99
Mecklenburg-Vorpommern - Fischland-Darß-Zingst (CALVENDO Wandkalender 2027)
59.99
Magische Blechträume (CALVENDO Wandkalender 2027)
59.99