patrik a i o foil board

OVERVIEW

A.I.O. = All in One

That'sexactlywhat PATRIK stands for, and we couldn't be prouder that they are being hailed as the "Tesla of wingboards" in Germany!
As a shaper and designer, Patrik leaves nothing to chance. His strength lies in riding everything he designs and feeling what is really needed.

Even with the smallest board size of 4'6" with only 35 liters, Patrik has proven his endurance on the water and pushed himself to his limits. These boards can be used for all types of Foil sports, from surfing to tow-in, wake, SUP, Wing and, in the two windsurfing variants, windsurfing. An innovative two-stage side shape gives the board unique stability and maneuverability. We decided to give you every option with our A.I.O. range, so all boards feature both deep turtle fin box options and the US plate system.

BUILD TO LAST:
The full carbon sandwich PVC construction makes these boards really stiff and consistently high-performing. On the A.I.O., you'll feel your Foil like never before.

The A.I.O. is the perfect foil toy for all passionate water sports enthusiasts out there!

DIMENSIONS

SHAPE

• Rail: For the 4'6"/5'0"/5'1", we developed a "step rail" to ensure good grip when duck diving and to reduce volume so that the board sinks for more stability in rough and windy conditions. It's difficult to kneel on a board when it's wavy, and the narrow shape also allows for deep, tight turns with a shorter mast when it's flat. The other sizes have a flat beveled nose entry to reduce drag and prevent water from sucking onto the rail. The round, box-shaped rail in the middle of the board provides the most volume near the bottom and makes the shape stable during takeoffs.
• Cutouts: For an easier and faster takeoff, the trick is to find the right reduction in tail volume to sink and position the front wing at a better angle of attack. The sharp edges around the tail are important to ensure clean water release and reduce drag when increasing or maintaining speed during takeoff and landing on the water.
• Bottom Shape:After testing, we decided on a shallower concave depth to prevent the board from dragging too much through the water. We therefore compromised between a slightly softer landing and a faster takeoff, more acceleration and speed, and less resistance with more release after the Found.
• EVA (deck pad): A full deck EVA with a slight bump to quickly see and feel the center of the board.
• Fin box: Whether you're shredding waves, pulling off freestyle moves, racing, or just cruising... we offer the Deep Tuttle foil box and 10" US tracks in all sizes.
• Inserts: With many different Foil setups, good foot positioning is crucial. With 68 possible positions for the front foot and 22 for the rear foot, we offer more options than anyone else.
• Leash Plug & Fin Handle: Secure your board with a wrist or leg leash attached to the leash plug on the tail. For strength and performance, we offer a grab handle fin for carrying the board, which attaches to the "FCS system" on the bottom of the board (from size 5'2" upwards).

CONSTRUCTION

The stiffer a foil board is, the more control and performance you have as a rider – it's that simple! As the only brand in the world capable of producing "one-shot monocoque" hollow-body windsurf boards (AIRINSIDE), we have also transferred our knowledge to our EPS boards. With a full deck-rail-bottom PVC sandwich with full deck-rail-bottom carbon wrap and the exclusive Pre-Preg Carbon/Honeycomb mast track & Deep Tuttle Foil box (depending on the model) and the exclusive monocoque reinforcements, we are easily the leaders in today's construction methods for this sport.

We know that there are boards available at very low prices everywhere on the market, but our concern is how long they will last. After a full season in Australia, it has become clear that softer constructions cannot withstand the stresses of more extreme riding, pumping, and hard landings. Anyone familiar with composite technology and a little bit about foilboarding knows that a board without PVC construction won't last long—not even for beginners.

It

is a fact that many brands simply use a PVC sandwich shell wrapped around the entire board in order to save money. Feedback from repair shops around the world is also clear – "Any construction without PVC sandwich will not last more than a few months – no matter how many carbon layers you put!"

1)     Stiff & lightare the keywords for learning quickly and performing at your best in competition.

2) Static load is the killer for any Foil board.
3)     Impactis a standard for all learners and professionals who want to improve.

That's why we are confident in offering you the best boards with the best construction technology currently available. Try it out and feel the difference!

RANGE OF USE